Orthopedic

Bone Holding Forceps: Lane, Verbrugge, Lambotte and Kern

Updated
Reading
6 min
Sources
6 cited
Written by
Medical Plus Team
Lane, Verbrugge, Lambotte and Kern bone holding forceps and bone reduction forceps from Medical Plus

Bone holding forceps grip a bone or hold a plate against it, while reduction forceps hold fracture fragments in the reduced position during fixation[1]. Lane, Verbrugge, Lambotte and Kern are four common bone holding patterns, and they differ mainly in jaw shape, length and locking mechanism.

Quick answer Lane: long and heavy, for gripping larger bones. Verbrugge: hooked jaws, used to secure a plate to bone[2]. Lambotte: toothed, cupped jaws with a ratchet. Kern: smaller, square serrated jaws. Add pointed reduction forceps for holding fragments while you fix them.

What is the difference between bone holding and reduction forceps?

Both are clamp-type instruments used in fracture surgery, but they do different jobs. In plate fixation, AO surgical guidance describes reducing the fracture and temporarily fixing it with forceps, then placing reduction forceps on the opposite fragment to hold it in the reduced position against the plate[1].

  • Reduction forceps usually have pointed or narrow tips that grip fragments across a fracture line, such as our Bone Reduction Forceps (15 to 30 cm, MP-19941 to MP-19944).
  • Bone holding forceps have broader jaws that wrap around a bone shaft or over a plate, so the surgeon can hold, turn or steady the bone.

Many trauma trays carry both types. The four patterns below are bone holding forceps.

How do Lane, Verbrugge, Lambotte and Kern forceps compare?

Bone holding forceps at a glance (Medical Plus catalog)
Pattern Jaw, as pictured Lengths we list Lock
Lane Long, serrated jaws that curve to encircle the bone 30, 32.5 and 42.5 cm (light and standard) With or without ratchet
Verbrugge Hooked jaws; serrated or one serrated, one plain 16 to 27 cm; jaw sizes from 5 to 12 mm Varies by version, including screw-joint styles
Lambotte Toothed, cupped jaws 19 to 33 cm (standard, Style B, adjustable) Ratchet
Kern Square-ended, serrated jaws 12 to 23 cm With or without ratchet

What are Lane bone holding forceps used for?

Quick answer Lane forceps are the long, heavy option: the curved, serrated jaws close around a bone shaft, and the long handles keep the surgeon's hands back from the wound.

Lane bone holding forceps with curved serrated jaws and ratchet, Medical Plus
Lane Bone Holding Forceps: note the curved, serrated jaws and the ratchet between the handles.

The pattern is named after Sir William Arbuthnot Lane, a British surgeon who developed long instruments in the 1890s so that even the gloved hand did not touch the wound, part of his "no touch" technique[3]. He is also regarded, with Albin Lambotte, as one of the founders of plate fixation[4].

  • Our Lane Bone Holding Forceps come in standard and light versions, at 30 cm / 11¾″, 32.5 cm / 13″ and 42.5 cm / 17″.
  • Each length is offered with or without a ratchet, for example MP-19984 (standard, 32.5 cm, without ratchet) and MP-19985 (with ratchet).

What is a Verbrugge forceps?

Quick answer A Verbrugge forceps has hooked jaws and is commonly used to hold a plate against bone. AO guidance, for example, describes securing a plate to the femur with a Verbrugge bone holding forceps[2].

Verbrugge bone holding forceps with hooked jaws and ring handles, Medical Plus
Verbrugge Bone Holding Forceps: hooked jaws and ring handles.

Verbrugge listings usually give a jaw size as well as an overall length, because the jaws need to fit the bone and plate you are working with.

What are Lambotte bone holding forceps?

Quick answer Lambotte forceps have toothed, cupped jaws on a ratchet, and come in several lengths and an adjustable version.

Lambotte bone holding forceps with toothed cupped jaws and ratchet, Medical Plus
Lambotte Bone Holding Forceps: toothed, cupped jaws and a ratchet near the handle ends.

Albin Lambotte was a Belgian surgeon credited with proposing the word "osteosynthesis"[5], and he is regarded as one of the founders of plate fixation[4]. Several instruments carry his name, including osteotomes and these forceps.

When would you use Kern bone holding forceps?

Quick answer Kern forceps are the compact option, with square, serrated jaws. In one published fibular nailing series, Kern bone-holding forceps were used to bring the fibula into end-to-end alignment[6].

Kern bone holding forceps with square serrated jaws and ratchet, Medical Plus
Kern Bone Holding Forceps: square-ended serrated jaws, shown with a ratchet.

Because the Kern is offered in short lengths, it is a natural choice where a Lane would be too long.

  • Our Kern Bone Holding Forceps come in 12, 15, 17, 21 and 23 cm.
  • Most lengths are offered with or without a ratchet, for example MP-19972 (15 cm, without ratchet) and MP-19976 (15 cm, with ratchet).

How do you choose bone holding forceps for a tray?

Quick answer Match the jaw to the job (shaft, plate or fragment), the length to the depth and bone size, and decide whether you want a ratchet. Then check the jaw size against your plates.

  1. Job. Gripping a shaft (Lane, Lambotte, Kern), holding a plate to bone (Verbrugge, Plate & Bone Holding Forceps) or holding fragments reduced (pointed reduction forceps).
  2. Length. Overall length is listed in cm and inches. Longer forceps give reach; shorter ones suit smaller bones.
  3. Jaw. Serrated, toothed or plain, and the jaw size where it is listed. Compare jaw size with the plates and bones you treat.
  4. Lock. A ratchet holds the jaws closed hands-free. Many of our patterns are offered with or without one.
  5. Bone quality and soft tissue. AO guidance warns that applying reduction clamps to osteoporotic bone can crush and devascularize it[2], and notes that indirect reduction avoids opening the fracture site to minimize further damage to the blood supply[1]. Technique is the surgeon's decision; stock enough options to support it.
  6. Reprocessing. Open ratchets and joints for cleaning and sterilization, and follow the instrument's IFU and your facility's protocols.

Featured in this guide

See all 40+ patterns in Bone Holding & Reduction Forceps, or the wider Orthopedic collection.

FAQ

Is a Verbrugge the same as a reduction forceps?

Not quite. A Verbrugge is a bone holding forceps with hooked jaws, often used to hold a plate to bone[2]. Pointed reduction forceps are used to hold fracture fragments in the reduced position[1].

What does the mm size on a Verbrugge listing mean?

It is the jaw size listed for that version (for example 9.5, 10.5 or 12 mm). The other figure is the overall length in cm and inches. Ask us if you need the jaw opening for a specific plate.

Should I buy forceps with or without a ratchet?

It is a surgeon preference. A ratchet holds the jaws closed without hand pressure; without one, the surgeon controls the grip directly. Many of our Lane and Kern sizes come both ways.

What is the difference between a Lane and a Lambotte bone holding forceps?

A Lane is the long, heavy option: its curved, serrated jaws close around a bone shaft, and we list it at 30, 32.5 and 42.5 cm, with or without a ratchet. A Lambotte has toothed, cupped jaws on a ratchet and comes in several lengths from 19 to 33 cm, including an adjustable version.

Sources

  1. AO Foundation, AO Surgery Reference – Basic principles of plating (undated web page). surgeryreference.aofoundation.org
  2. AO Foundation, AO Surgery Reference – Distal femur: ORIF, blade plate (undated web page). surgeryreference.aofoundation.org
  3. Clinical Orthopaedics and Related Research – Brand RA. Sir William Arbuthnot Lane, 1856–1943 (2009). PMC2706364
  4. International Orthopaedics – Hernigou P, Pariat J. History of internal fixation (part 1): early developments with wires and plates before World War II (2017). PubMed 27878623
  5. Revue Médicale de Bruxelles – Andrianne Y, Hinsenkamp M. Historical review of the treatment of fractures: contribution of Belgian surgery to the origin and development of osteosynthesis (2011; in French with English abstract). PubMed 22458054
  6. Cureus – Lau CL, et al. Outcomes of fibular nailing: experience from a single center (2025). PMC12228482

General questions about ordering

Can Medical Plus instruments be autoclaved and reused?

Our stainless-steel surgical, electrosurgical and piercing instruments are made for repeated use and are compatible with standard steam sterilization (autoclaving) when they are cleaned and maintained properly. Follow the instructions supplied with the instrument and your facility's or studio's protocol, and check the Key Specs on the product page. If you are unsure about a coated instrument, contact us before autoclaving it.

What are the instruments made of?

Stainless steel, as listed in the Key Specs on each product page. Some piercing forceps and clamps have a dip-molded jaw coating in nylon or DEHP-free plastisol, and selected forceps come in gold, black or rainbow plasma finishes.

How quickly do orders ship?

Catalog orders are processed within 1–3 business days after payment confirmation. Delivery then takes 3–7 business days in the U.S. and 7–21 business days internationally. Details are in our Shipping Policy.

Do you offer bulk or volume pricing?

Yes. We quote volume pricing for hospitals, surgical centers, distributors, piercing studios and OEM partners. Email info@medicalplusinc.com or call 516-450-0879 with the catalog numbers (MP-…) and quantities you need.

Can you make a custom size, coating or private-label instrument?

Yes, subject to manufacturing feasibility and minimum order quantities. Custom OEM, private-label and large bulk orders typically take 4–10 weeks depending on complexity, materials and volume. See Custom & OEM manufacturing.

Can I get a sample before placing a larger order?

Samples are available for qualified medical facilities, distributors and OEM partners. Email info@medicalplusinc.com to request one.

What is your return policy?

Defective or damaged items reported within 7 business days of receipt can be returned if they are unused, in the original packaging and with proof of purchase. Single-use and sterilized instruments cannot be returned. Full details are in our Refund Policy.

How do I check that an instrument matches the one I already use?

Compare the pattern name, overall length and tip or jaw size on the product page with your current instrument. If you are still unsure, send us the catalog number (MP-…) and we will confirm the fit.